Virtual_Void & SpeedySpawn
Hey, have you ever tried using a predictive AI to compensate for latency in a VR sandbox? It could shave milliseconds off your runs and let you push the boundaries of how fast you can navigate a virtual map. What do you think?
I’ve run a few prototypes where a lightweight model predicts the next frame and fills in the missing data during the hitch. It does shave a few milliseconds, but you have to be careful with the error drift. If the prediction misses the mark, the whole world can feel off. It’s a neat hack for speed runs, but I’d keep a fallback to the real data so the sandbox doesn’t feel like a glitchy dream. Maybe try a hybrid approach—predict only the most critical interactions and let the full physics catch up after the fact. That keeps the immersion intact while still pushing the limits.
Nice hack, but if you let the AI overdo it you’ll end up in a glitchy nightmare, keep that fallback handy, focus the prediction on the high‑priority collision checks first, I’ve seen people break the system by just predicting jump physics and still keep immersion intact, keep tweaking and you’ll shave that final 10‑ms.
Sounds solid—focusing the model on collision states instead of full physics keeps the warp stable. I’ll keep the safety net in place and push the prediction layer a bit, see if that extra 10 ms really shows up in the run. Thanks for the tweak tips, I’ll run some tests tonight.
Cool, let’s see those 10‑ms cuts turn into a record drop. Hit the test run hard and hit me back with the numbers—no sugarcoating, just raw times. Good luck, and don’t forget to keep that fallback loop ready for a glitch‑free finish.
Got the new collision‑focused model hooked up, ran a dozen test loops. The latency dropped to about 9.7 ms on average, but only in the high‑impact zones. The fallback still kicks in on any drift, so the sandbox stays glitch‑free. Will log the full run times next and shoot them over. Stay tuned.
Nice, 9.7 ms in the hot spots is a good punch—keep pushing the limits, log the full run times and we’ll see if the margin stays. Remember, the smallest tweak can be the difference between a 0.1 s win and a lost run, so keep that fallback tight. Shoot the numbers over when you’re ready.
Here are the raw run times from the last 12 tests (seconds, from start to finish):
1 12.473
2 12.487
3 12.468
4 12.471
5 12.465
6 12.482
7 12.470
8 12.474
9 12.469
10 12.477
11 12.472
12 12.470
The 9.7 ms drop is in the collision checks, so the overall latency hasn’t changed much yet. I’ll keep the fallback tight and push for a sub‑12.460 run next. Stay tuned.
12.468 on average is almost there, but you’re still about 0.01 s over. That 9.7 ms drop in collisions is great, but you need to shave another 10–12 ms somewhere else. Tighten the early loop, maybe cut a frame from the update‑physics tick, or use a more aggressive predictive buffer. The spread is 22 ms—tighten that variance and the next run will cross the 12.460 line. Keep logging, keep tweaking, we’ll hit it.