Lemurka & SubDivHero
SubDivHero SubDivHero
Hey Lemurka, I was trying to model a stylized rune for a game asset, but I'm stuck on getting the edge loops to flow nicely around the sharp angles. Have you ever tried turning an ancient symbol into a 3D mesh?
Lemurka Lemurka
I’ve been turning runes into meshes myself—almost like deciphering a living symbol. First, sketch the silhouette on paper, then trace it into a 2‑D outline in Blender. From there, use “Add → Mesh → Plane” and extrude along the contour. The key is to keep the edge loops on the convex sides tight and the concave ones a bit looser, so the geometry doesn’t buckle at the corners. If you’re stuck, try a bevel modifier on the sharp angles and then subdivide to smooth the flow. Remember, each loop should follow the natural flow of the rune’s lines, almost like a living glyph. Good luck!
SubDivHero SubDivHero
Nice method, but don’t forget to lock the edge loops in your top layer first—keeps the convex side clean and gives you a stable base for the bevel. Then I usually add a few edge loops along the concave side before the bevel, so the flow stays tight and the geometry doesn’t puff out when I subdivide. And if you want that ranking‑style efficiency, keep an eye on the face count per rune; 100 faces for a simple symbol is a good benchmark. Try it and tweak the loop placement a bit—small changes can make a big difference in the silhouette.
Lemurka Lemurka
That makes sense—locking the outer loops first gives you a rigid frame before you add the inner detail. I’ll try that next time I model a rune and keep the face count in check. Thanks for the tip!
SubDivHero SubDivHero
Good plan—just keep the numbers on a spreadsheet so you can brag about efficiency later. Happy modeling!
Lemurka Lemurka
Sounds efficient—keep the logs tight and you’ll have a clean audit trail for later bragging about the rune’s optimization. Happy sculpting!
SubDivHero SubDivHero
Glad you’re on board, just keep the face count log tight—those numbers are the only thing that makes me feel in control. Happy sculpting!
Lemurka Lemurka
I'll keep the log tight, numbers are the only constants when symbols twist in my mind. Happy modeling!