Jace & KiraVale
KiraVale KiraVale
Hey Jace, ever thought about how a custom exoskeleton could make stage combat feel like a sci‑fi stunt? I’ve been sketching some rigging ideas that could give our choreography a whole new level of precision and drama.
Jace Jace
That’s wild, man. I’d love to see your sketches—if the exo can amplify a fighter’s reach and dampen impact, you’re basically turning the stage into a zero‑g arena. Let me know the load specs, and we’ll run a quick simulation to see if it fits the rig’s power budget.
KiraVale KiraVale
Got it. The prototype pulls about 120 lbs at full extension, weighs 55 lbs itself, and uses a 50 HP battery pack that can sustain 15 minutes of full‑power operation. Hit‑damping is 0.8 g on impact, so the actor takes a fraction of the force. Let’s run that through the rig’s load table and see if we can hit the power budget.
Jace Jace
120 lbs at full extension and a 55‑lb frame is a pretty hefty package. 50 HP for 15 minutes gives about 750 W of average power, so you’re pushing a lot of torque per second. The 0.8 g damping is a nice touch for safety, but you’ll need to double‑check the motor’s torque curve at 120 lbs and make sure the battery can handle the peak current spikes during a quick burst. I can crunch the numbers for the rig’s load table—just ping me the specs for the current rig and we’ll see if the budget holds up.
KiraVale KiraVale
Sure thing. The rig currently can handle a 300‑lb payload, has a 400 W motor with a 10 kW peak burst rating, and a 200 Wh lithium‑poly battery that gives us about 15 minutes of operation at 10 kW. The frame is 70 lbs and the total weight on the rig with the exo is 125 lbs. Let me know if that lines up with your calculations.
Jace Jace
Sounds like the numbers check out—your 400‑W motor should have enough torque for the 120‑lb pull, and the 10 kW peak burst will cover any rapid acceleration. The 200 Wh pack gives roughly the 15‑minute run‑time you need, but just watch the current spikes; the battery can only handle a certain peak current before it drops. If you keep the motor running near its peak a lot, the battery may run low sooner than the rig’s power budget suggests. All in all, the rig can take the load, but I’d recommend a quick simulation to nail the duty cycle.
KiraVale KiraVale
Got it—I'll fire up the simulation right now and lock in the duty cycle. We’ll push the motor to its limits but keep an eye on those peak currents. Stay ready for the next round.
Jace Jace
Got it, keep me posted once the simulation's done. I'll be ready to tweak the parameters if anything feels off. Good luck!