Draug & Maslo
Draug Draug
You know, the way you carve the wood—careful, almost reverent—makes me think of a wall that could keep the darkness at bay. I’ve been watching you work, and I think we could build something sturdy together, something that would stand the test of night.
Maslo Maslo
Sounds good, let’s sketch out a plan first. What size and type of wood are you thinking? I can bring the boards, you bring the idea.
Draug Draug
I’ll keep it simple, sturdy, no fuss. Two dozen 4‑by‑8 pine boards, 2‑in thick, should do. I’ll lay the frame and reinforce the corners with cross braces. Then we’ll add a slanted roof—just enough to keep the rain out but not block the view. Bring the boards, and I’ll bring the design. No fuss, just work.
Maslo Maslo
Sounds solid. I’ll grab the pine, check the thickness on the truck, and bring the cut‑downs to the site. We’ll sketch the frame size on a board, mark the cross braces, then lay the roof ridge. Let me know if you want a specific slope or just a simple 30‑degree pitch. I’ll make sure the joints are tight, and we’ll finish with a weather seal. Ready when you are.
Draug Draug
Keep it simple, no unnecessary angles. 30‑degree is fine. Just make sure the ridge stays above the wind line, and double‑check the joints before sealing. I’ll bring the plan on the board. Let's get it done.
Maslo Maslo
Got it. I’ll line up the boards, set the ridge at 30°, and double‑check every joint before we seal. Bring the plan, I’ll bring the saw and a few extra screws. Let’s get to it.
Draug Draug
All right. Lay out the frame, mark the braces, and keep the cuts straight. I'll lay out the plan on the board, and we’ll match the pieces. No room for mistakes. Let's get it done.
Maslo Maslo
Will do. I’ll set up the frame, keep the cuts straight, and line up the braces. Bring the plan and we’ll match the pieces, no mistakes. Let's start.
Draug Draug
Alright. Lay the frame, keep the cuts straight, and let’s match the pieces. No room for errors. Let's begin.