Dagon & Smola
I've watched the tide push ships across centuries; maybe its rhythm could power your next machine.
Tide power isn’t a plug‑and‑play, you’d need a turbine and a sturdy foundation. If you can lay out the specs and show me the energy budget, I’ll take a look. Otherwise, keep it to the shore.
You need a turbine that can swallow the sea’s pulse and a foundation that won’t give way to the waves. Send me the dimensions, expected flow, and how much power you aim to capture, and I’ll weigh whether the tide can truly feed your ambitions. Otherwise, the shore will be your only guide.
Give me the turbine size in meters, the mean tidal flow in cubic meters per second, and the power target in kilowatts. Then we’ll see if the sea can keep the gears turning. If not, I’ll find a solid point on the shore to plant the engine.
Turbine about six metres across, average tidal flow four cubic metres per second, aiming for fifteen kilowatts of output. If the numbers hold, the tide will drive your gears; if not, let’s anchor on solid ground instead.
Five‑or‑six metre rotors won’t give you fifteen kilowatts at four cubic metres per second – the math’s off by a lot. Either you double the turbine count, crank up the flow, or settle for a lower output. If you’re serious, map out the tidal range first and then size a smaller, more efficient rotor. Until that’s clear, keep your machine on solid ground.
You’re right the numbers are off. The tide’s depth and timing are what set the limits. If you chart its rise and fall first, we can choose a rotor that fits its rhythm. Until then, your machine will need a firm ground.
Sounds good. Map the tides first, pick a rotor that fits, and then we’ll see if the gear can spin. Until we’ve got the data, keep the machine on solid ground.
I will await the tides’ story, then decide. Until then, the machine stays grounded.