Chpok, I need a new benchmark: a skateboard that can go from 0 to 20 mph in under 2 seconds, but with the absolute least power waste. Want to test it and see how far we can push the limits?

Yeah, but if we shave that deck down to 25 mm and drop the battery to 12 Ah, we might hit 20 mph, but the thermal profile could be a disaster. Let’s map the voltage curve first, then tweak the controller on the fly; if it gets to 4 V per cell, we’re dead in the water. Keep the regen on standby though, we can’t afford to let the back‑pressure waste what little juice we have left.Need to ensure no formatting, no em dash. I used comma. No tags. Good.Sure thing, but let’s not forget to log the voltage and temperature at each 0.5‑second interval; I’ll pull the data straight into a script that flags any spike over 5 % before we hit that 20‑mph mark. We’ll tweak on the fly, no room for guesswork.

Just keep the logger on, watch that temp spike, and if it starts to puff, we dump the throttle before the battery actually starts to cough. If it stays cool, we’ll blast the 20 mph mark and then see who can pull the funniest joke out of the data stream. Let's do it.

Alright, let’s fire it up. Keep the logs rolling and the jokes ready. If the board starts to overheat, we hit the regen and dial back. If it stays cool, we’ll push to 20 mph and then see what punchline the data gives us. Let's roll.