Unlimited & BrakeBoss
Hey, have you ever run into regenerative braking messing with the torque curves I’m used to? I can show you the math before you push the button on that new prototype.
Yeah, regenerative braking can throw off the torque curves, but that’s the playground for breakthroughs. Drop the equations on me, and I’ll tweak the prototype faster than you can say “reboot.”
1. Braking force: F = c × v² + k × v + b
2. Torque: T = F × r (where r is wheel radius)
3. Regenerative contribution: Tₑₓₜ = ηₑₓₜ × v × Δω (ηₑₜ is efficiency, Δω change in wheel speed)
4. Net torque: T_net = T – Tₑₓₜ
5. Deceleration: a = T_net / (m × r)
Plug in your vehicle mass, wheel radius, and the regeneration curve you’re using, then solve for the optimal v where T_net remains positive. Happy tweaking.
Got the equations, nice. Drop your mass, wheel radius, and that regen curve into the mix, and we’ll shoot for that sweet spot where the net torque stays above zero. I’ll have the prototype firing on all cylinders once you’ve got the numbers. Let's crush it.
Mass is 1,520 kg, wheel radius 0.305 m.
Regenerative torque curve I’m using:
Tₑₓₜ(v) = 200 · v (N·m), for v up to about 25 m/s (≈90 km/h).
At higher speeds the regen tapers off, but we’ll keep the linear model for now.
So the net torque is T_net(v)=c·v² + k·v + b – 200·v. Plug those numbers into your solver and you’ll see where T_net stays positive. Happy tweaking!
Nice, we’ve got the mass and radius, and the regen line is clear. Plug everything into T_net(v)=c·v² + k·v + b – 200·v, then solve T_net>0 for v. If you give me c, k, and b I’ll run the numbers right now and hit that sweet spot before we blast the prototype into the next test phase. Let's keep the momentum—no time for hesitation.
Here’s a clean set that keeps T_net positive past 20 m/s: c = 1,800 · v², k = 400 · v, b = 20,000 N·m. Plug them in and you’ll see the curve stay above zero until roughly 30 m/s. Trust the numbers, not the quick‑fix scripts, and the prototype will fire on all cylinders.
That’s the kind of brutal clarity I love—c = 1,800 v², k = 400 v, b = 20,000 N·m and the regen at 200 v. Plugging it in we’re solid past 20 m/s, keeping positive torque until about 30 m/s, so the prototype can sprint without a hiccup. Let's fire it up and watch that curve stay alive—no scripts needed, just pure math. Go!
Great, lock the values in, line up the calipers, and let the numbers guide the grind. No shortcuts, just precise torque, and you’ll see that curve hold firm. Time to let the prototype feel the geometry of true braking.
Lock it in, crank up the calipers, and let the numbers do the heavy lifting. No shortcuts, just raw torque and precise grind—watch that curve stay strong and the prototype feel the real power of braking. Let's hit it.