Hey VinylMuse, have you ever imagined a vinyl sleeve that changes its art with the music—like an AI that reacts to the song in real time? I’ve been tinkering with a concept where the cover updates subtly while you play, blending tactile nostalgia with digital flair. What do you think?

Sounds amazing—I can already picture the vinyl glowing a bit when the chords shift. For a prototype I’d start with a small OLED patch on the sleeve that lights up with a simple hue shift tied to the track’s tempo and key. Then we can test it on a single track, tweak the fade times so the color doesn’t jump too fast, and see how the shelf feels with it. Let me know if you want me to sketch out the circuitry or pull some code samples for the color mapping.

Here’s a quick mental sketch: a tiny 0.96‑inch OLED (I2C) glued to the back of the sleeve, connected to a tiny ATtiny85 that reads a 3‑pin FSR to sense when the record is set down. The ATtiny runs a 512‑Hz timer, samples the PCM buffer from an external ADC (or a simple micro with built‑in I2S), extracts the current tempo (via beat‑matching) and the dominant pitch class, then pushes an HSL value to the OLED. The code below is just a barebones mapping of the key to hue, using a 16‑bit hue wheel; the LED flickers gently because the hue change is smoothed over 250 ms. ```c // ATtiny85 sketch #include <TinyOLED.h> // placeholder library #include <TimerOne.h> TinyOLED oled(0x3C); // I2C address int lastKey = -1; int hue = 0; // Map key (0=C, 1=G, 2=D, …) to hue angle int keyToHue(int key){ return (key * 360 / 12) % 360; // 12 keys evenly spaced } void updateDisplay(int key){ int targetHue = keyToHue(key); int diff = targetHue - hue; if(diff > 180) diff -= 360; if(diff < -180) diff += 360; hue += diff / 4; // smooth step if(hue < 0) hue += 360; if(hue >= 360) hue -= 360; // Convert hue to RGB (simplified) float rad = hue * PI / 180; uint8_t r = 127 + 127 * cos(rad); uint8_t g = 127 + 127 * cos(rad + 2*PI/3); uint8_t b = 127 + 127 * cos(rad + 4*PI/3); oled.setColor(r,g,b); oled.fillRect(0,0,64,48); // fill whole screen oled.display(); } void timerISR(){ int currentKey = getDominantKey(); // placeholder for analysis if(currentKey != lastKey){ updateDisplay(currentKey); lastKey = currentKey; } } void setup(){ oled.begin(); Timer1.initialize(50000); // 20 Hz Timer1.attachInterrupt(timerISR); } void loop(){ // idle, everything handled by ISR } ``` The “flicker” is just the small incremental hue step; the OLED’s native 4‑bit color depth keeps it subtle. Imagine that tiny glow on a black lacquer sleeve, shifting just enough to hint at the music without overpowering the look. Let me know if you want more detail on the hardware or a CAD file of the mounting bracket.

Here’s a quick mental sketch for the mounting cradle: imagine a 3 mm wide U‑shaped bracket made of 1.2 mm thick aluminum. The U‑leg is 5 mm long on each side, with a 1 mm lip at the top that sits just inside the sleeve’s seam. The bottom of the U has a shallow 0.5 mm groove that the OLED’s frame slides into, giving a snug fit but still letting the glass face a tiny shadow under the LED. The top of the U has a tiny 0.8 mm screw hole on each side for a 1.2 mm M2 screw that pulls the bracket against the sleeve edge. The whole assembly is only 3 mm tall, so it sits almost flush against the lacquer. It should hold the OLED securely while keeping the glow understated, like a whisper of light. Let me know if you’d like a more detailed CAD or a material suggestion.