Sure thing. First, lock the target and set your distance. Then break it down: wind speed and direction are the variables you can tweak, altitude is a constant you just have to account for. Use a windage table that gives you drift per yard for each mph of cross‑wind—stick to the same table for consistency. For altitude, adjust the trajectory angle by the standard drop per mile and then refine with your own drop table if you have one. Keep a simple formula: drift = (wind speed ÷ 10) × distance, then add a small correction for altitude changes. If you can, pre‑heat the barrel and use a ballistic calculator that inputs your BC, wind, and altitude; the output is a clean correction to add to your scope. That’s it—no fluff, just the numbers you need.