Ximik & Velcro
Velcro
So you finally cracked that polymer that sticks like a dream? I’ve been waiting for something that can cling on a dime, so let’s see what your lab’s got.
Ximik
Yes, the polymer is finally stable, but the adhesive is still a bit too sensitive to humidity – you’ll need to keep it dry or you’ll lose the bond.
Velcro
Alright, dry storage is a must, or the stick’s gone to hell. Maybe a moisture‑tight case or some desiccant packs. No excuses—get it sealed or the whole thing’s a flop.
Ximik
Absolutely, I’ll design a sealed chamber with a built‑in humidity sensor and silica gel packs, keeping RH under 5%. I’ll run stress tests at each level of dryness and log everything. No excuses, the adhesive won’t flop if the environment’s controlled.
Velcro
Nice, you’re already a few steps ahead. Keep that chamber sealed, log every drop, and we’ll see that adhesive stick like a champ—no flops allowed.
Ximik
Glad to hear it. I’ll start the logging protocol now and set the chamber to 2 °C, 2 % RH, with a moisture sensor calibrated to millivolt accuracy. I’ll run the first adhesion test and report the force data every minute—no flops, only data.