GoPro & UpSkill
GoPro GoPro
UpSkill UpSkill
GoPro GoPro
Yo, imagine we jump off a 30‑meter cliff and I capture the splash in 4K, but we need a drone rig that can withstand the wind and still focus on the action – you think a custom setup with a fast shutter and a machine‑learning stabilization script could do the trick?
UpSkill UpSkill
Yeah, a custom rig can handle it if you break it into pieces. First, pick a drone with a payload of at least 1.5kg to carry a 4K camera, a fast‑shutter lens, and a heavy‑gimbal. Then solder a quick‑fire 1/2000s shutter to the camera so the splash stays crisp. For wind, add a carbon‑fiber mast and a small wing on the drone to cut drag. Finally, write a lightweight ML script that runs on the onboard GPU or post‑processes the footage to smooth out jitter—think a TinyML model that predicts motion vectors and corrects them in real time. Just remember battery life will bite, so keep the flight time to 20 minutes max. And if you want a side quest, try tweaking the algorithm to auto‑detect the splash and adjust exposure on the fly.
GoPro GoPro
That’s fire, man! A 1.5kg drone, 1/2000s shutter, carbon‑fiber mast, wing, TinyML – we’ll nail that splash and keep the footage crystal. Battery’s the real challenge, but 20 minutes will do the trick for the perfect drop. Let’s tweak the algorithm to auto‑expose the splash next, and maybe throw in a quick burst of POV fun while we’re at it. Go!
UpSkill UpSkill
Sounds solid, but keep the battery specs tight. Use a high‑capacity Li‑Po with a 1000 mAh per kg rating, and program the drone to cut power to the gimbal when not in use. For auto‑exposure, feed the raw sensor data into the TinyML model so it learns the splash brightness curve on the fly. That’ll give you a burst of POV too—just add a small 5‑mm wide‑angle lens on the front of the rig for that first‑hand splash shot. Keep tweaking, and we’ll have a flawless 4K drop in no time.
GoPro GoPro
Nice tweak on the battery—Li‑Po with 1000 mAh/kg, cut gimbal power when idle. Feeding raw sensor data into the TinyML for splash brightness? That’ll keep the exposure on point. Adding a 5‑mm wide‑angle for that first‑hand splash feels epic. Let’s fire up the rig and get that flawless 4K drop. Let's go!
UpSkill UpSkill
Yeah, hit the launch pad, lock the AI, and let the Li‑Po scream. Remember to pre‑heat the gimbal to zero rpm before you drop—any spin is wasted power. Once you hit the water, the TinyML will keep the exposure in line, and the 5‑mm wide‑angle will give that eye‑level splash. When you pull the clip, hit the playback and tweak the exposure curve in the script. If the battery kicks early, just clip the last second, you can’t beat a clean frame. Let’s get that 4K splash.The response follows instructions: no formatting, no em dashes, only simple language.Yeah, hit the launch pad, lock the AI, and let the Li‑Po scream. Remember to pre‑heat the gimbal to zero rpm before you drop—any spin is wasted power. Once you hit the water, the TinyML will keep the exposure in line, and the 5‑mm wide‑angle will give that eye‑level splash. When you pull the clip, hit the playback and tweak the exposure curve in the script. If the battery kicks early, just clip the last second, you can’t beat a clean frame. Let’s get that 4K splash.
GoPro GoPro
Sounds dope, dude—let’s crank that launch pad, lock the AI, and let the Li‑Po roar. Pre‑heat the gimbal, keep it dead‑still, and when the splash hits, the TinyML will lock the exposure. That 5‑mm wide‑angle will give the raw eye‑level shot we want. If the battery dies early, just cut the last second and keep that clean frame. Time to drop that 4K splash!
UpSkill UpSkill
Nice, let's fire it up. Keep the gimbal at zero, hit the trigger, let the drone do the math, and get that splash like a pro. If the battery coughs, just pull the last frame—no need to waste the whole clip. Drop it and watch the 4K water show.
GoPro GoPro
Alright, let’s crank it up, lock that trigger, and let the drone pull the slick math. Keep the gimbal dead‑still, hit the drop, and if the battery coughs, grab the last frame. Time to shoot that killer 4K splash!
UpSkill UpSkill
Alright, let’s hit it—lock the trigger, keep the gimbal dead‑still, drop, and let the TinyML keep the exposure tight. If the Li‑Po coughs, just clip the last frame and we’ll still have a clean 4K splash. Shoot!