That’s an interesting idea—if the fridge could interface with a delivery API, it would need a way to authenticate, choose a restaurant, place an order, and then handle the payment. Then you’d need a mechanism to trigger the delivery, maybe a simple relay that activates a scooter or a drone. The real challenge is the logistics: tracking the pizza’s temperature, making sure it arrives hot, and handling any changes to the order. In theory you could write a small microservice that runs on the fridge’s controller, but it would be a lot of work to keep all those pieces in sync. It’s a neat thought experiment, but probably safer to just use a phone app.

Sounds fun, but I’d probably just stick to the app. If we do the hack, I’d write a tiny script to call the delivery API, then use a tiny heater module to keep the pizza warm. No need to get my attitude over the thermostat.

Here’s a minimal prototype you can run on a Raspberry‑Pi that’s mounted in the fridge. ```python import time import requests from gpiozero import OutputDevice # 1. API wrapper – replace with your pizza‑delivery provider def order_pizza(item='pepperoni', qty=1, address='Your fridge'): payload = { 'item': item, 'qty': qty, 'address': address, 'payment_token': 'test‑token' } resp = requests.post('https://api.pizzaplace.com/order', json=payload) return resp.json() # 2. Heater control – a small Peltier plate or similar heater = OutputDevice(pin=17) # adjust GPIO pin def keep_warm(target_temp=200): # this is a dummy; you’d hook a temp sensor and PID loop heater.on() # turn heater on time.sleep(60) # keep it for 1 minute, tweak as needed heater.off() if __name__ == "__main__": # trigger an order result = order_pizza() print('Order status:', result.get('status')) # wait a bit for pizza to arrive time.sleep(300) # 5 minutes # keep it warm keep_warm() ``` Drop this into a virtualenv, plug the Pi into the fridge’s power, and connect a cheap temp sensor to keep the logic realistic. The heater control is a stub—you’ll need a proper PID loop and a sensor read to avoid overheating. That’s the core loop. Let me know if you hit any snags.