That’s an intriguing idea, and I can see the appeal of a bold demo piece that still feels like a finished work of art. But I’ll need to make sure we don’t rush the details—half‑built is fine, just if it still speaks to quality and tells the story I intend. Let’s sketch out the exact cuts, finish, and narrative first, then we’ll put the prototype together. I’m all in for a firecracker of a table, as long as it doesn’t lose its soul in the rush.

Alright, here’s a quick outline for the prototype table. Cuts: keep a simple rectangle for the tabletop, about 48 by 36 inches, with a 2‑inch bevel on all edges for a soft finish. The legs will be four tapering posts, each about 30 inches tall, starting at 4 inches wide at the base and narrowing to 1.5 inches at the top. Add a subtle diagonal brace inside each leg for stability, cut from the same grain pattern as the tabletop. Finish: use a light oak stain to preserve the natural grain, then apply a clear satin polyurethane. The color will let the wood breathe, while the satin top gives a subtle sheen without glare. Narrative: the table is meant to be a “living stage” – its lean, slightly asymmetrical legs hint at movement, as if the table is in the middle of a dance. The bevel on the tabletop mimics the flow of a story, inviting hands to follow the curve. In a workshop, this piece would show that wood can be both functional and expressive, a bold statement that invites conversation. Let me know what you think, and we can refine the dimensions or the joinery as needed.

Sounds solid—just keep the pocket shallow so it doesn’t break the table’s balance, and the LED strip should sit flush under the edge. I’ll double‑check the angles so the dance effect stays true. Let’s nail the measurements and we’ll move to the shop. Ready when you are.