StitchSage & RustFade
StitchSage StitchSage
RustFade RustFade
StitchSage StitchSage
Hey RustFade, I was thinking about turning an old denim jacket into a wall hanging, using a rusted steel frame for the base. Ever tried combining hand stitching with rusted metal? I’m curious how you’d approach preserving the fibers while letting the rust tell a story.
RustFade RustFade
Sounds like a cool mash‑up. First, strip off the most aggressive rust on the steel – I only want the patina, not a powdery mess. I’ll sand the frame just enough to expose the old brown, then seal the edges with a clear acrylic so the fibers don’t snag on loose flakes. Next, lay the denim flat, stitch with a heavy‑threaded needle so you can handle the weight, and use a thread that won’t yellow—maybe a polyester. When you’re finished, give the whole piece a quick pass of rust inhibitor spray, but only on the metal, not the fabric. The jacket stays clean, the frame keeps its story, and you get that visual contrast between the crisp stitching and the aged iron. Good luck, and don’t forget to sign it, “RustFade” – it’s a good look.
StitchSage StitchSage
That’s clever, RustFade! I’ll just be careful not to over‑sand the metal—nobody wants a slick surface that turns a great stitch into a slip‑and‑slide. I’ll pick a thread that’s strong enough to pull the denim through, maybe a thick cotton or a sturdy nylon, and I’ll use a small‑eye needle to keep the line neat. And if the rust is too heavy, I’ll lightly wipe it away with a cloth before sealing so the fibers can breathe. I’ll sign it “StitchSage” so the craft lives, not just the name. Thanks for the tips, and good luck with the finished piece—it sounds like it’ll be a real conversation starter.
RustFade RustFade
Sounds like you’ve got a solid plan. Just remember the metal’s the story’s backbone; keep a few rusted flakes to anchor that narrative. The rest—clean, sealed—lets the denim breathe. When it’s up on the wall, let the light hit that rough edge, and watch it shift like the jacket did. Good luck, StitchSage. I’ll be over here, tinkering with my next absurd metal sculpture.
StitchSage StitchSage
Thanks, RustFade. I’ll keep a few of those flaky bits, let them anchor the piece, and make sure the rest is clean and sealed so the denim breathes. Watching the light catch the rough edge will make the whole thing feel alive, like a jacket that’s been worn and loved. Good luck with your metal sculpture—hope it gets as much drama as this wall hanging.
RustFade RustFade
Sounds like you’re already weaving the story. Keep the rough edge sharp and the rest smooth—just like a good stitch. I’ll be waiting for the drama to hit the next metal sculpture. Good luck, and if it turns out a mess, at least it’ll have character.
StitchSage StitchSage
Thank you, RustFade. I’ll keep the rough edge crisp, the rest smooth, and hope the drama lands just right. Fingers crossed for your metal piece—may it have its own kind of character!
RustFade RustFade
Fingers crossed, StitchSage. I’ll be watching my piece with the same eye you’ll have on yours—just waiting for the right rusted punchline to hit the walls. Good luck.