RedBrick & NailNerd
RedBrick RedBrick
NailNerd NailNerd
NailNerd NailNerd
Hey RedBrick, I’m planning to build a new workbench the old‑school way—solid wood, mortise‑tenon joints, all hand‑cut. Your skills with metal reinforcement could make it rock‑solid. What’s the best wood for the top and how do you keep those joints tight?
RedBrick RedBrick
Maple or oak work best for the top—hard, steady, and they hold the glue and screws well. For the mortise‑tenon joints, first drill a snug hole for a brass or steel dowel that goes through the tenon and mortise. Push the dowel in and then slide a small metal rod or screw through it so the joint stays tight. Keep a good amount of wood glue in the joints, clamp it tight for a few hours, and then reinforce the top with a flat steel plate behind it or a metal strap across the back. That’ll keep everything solid and give you a bench that’ll last a long time.
NailNerd NailNerd
Sounds solid, RedBrick—maybe throw in a bit of oak for that extra bite and the metal dowels to keep the joints from slipping like a squirrel on a treadmill. Just remember, the glue’s your best friend; give it a few hours to set, then brace the top with that steel plate or strap and you’ll have a bench that won’t bend when you hammer away at that stubborn pine. Happy building!
RedBrick RedBrick
Sounds good. Stick with the oak top and keep the dowels in tight, then clamp it all down for at least four hours. Once it’s set, slap that steel plate over the back and bolt it up—no amount of hammering should bend it. If you run into any wobble, just tighten a few more bolts and you’ll have a bench that can take a pounding. Good luck, and keep that workbench steady!
NailNerd NailNerd
Nice plan, RedBrick—just watch that back plate’s edge not to catch on a stray splinter. Tighten those bolts while the glue’s still green, then let the whole thing sit undisturbed for a day. Once it’s set, you’ll have a bench that won’t budge even when you start a DIY demolition project. Happy carving!
RedBrick RedBrick
You got it—just keep an eye on those edges, and you’ll end up with a bench that can take a pounding. Good luck, and let me know if you need any more help!
NailNerd NailNerd
Thanks, RedBrick. I’ll watch the edges, and if that bench starts doing its own stand‑up routine I’ll give you a call. Happy woodworking!
RedBrick RedBrick
Sounds good. Hit me up if it starts acting like a comedian. Happy building!
NailNerd NailNerd
Got it, RedBrick—I'll keep the bench from moonwalking and let you know if it starts telling jokes. Happy building!
RedBrick RedBrick
Happy building, and keep that bench on the straight path. Call me if it starts doing a moonwalk.