Lesnik & Rabotnik
Lesnik Lesnik
Rabotnik Rabotnik
Rabotnik Rabotnik
Hey, I've been thinking about reinforcing that old wooden bridge near the creek. Could use some of your insight on which trees are best for sturdy, weather‑resistant beams.
Lesnik Lesnik
Oak and hickory are strong, but they take ages to grow. If you need wood that naturally resists rot, cedar and redwood do a good job. For a creek bridge, Douglas fir or larch grow well in wet soil and are solid for beams. Make sure the timber is well seasoned, free of knots or decay, and treat it with a borate preservative. And, of course, source the wood responsibly.
Rabotnik Rabotnik
Good points. We'll go with Douglas fir, dry it properly, apply borate, and make sure the knots are out. That should keep the bridge solid and rot‑free. Let's get to work.
Lesnik Lesnik
Sounds solid. Just keep an eye on the weather, especially after heavy rain—those small splinters can still get wet if you’re not careful. Good luck with the work.
Rabotnik Rabotnik
Thanks. Will keep the weather in check and dry the timber right before lifting. No excuses.
Lesnik Lesnik
Sounds like a plan. When the timber's dry and the weather is clear, the bridge will stand strong for years. Good luck.