HollowBoy & ProtoMach
HollowBoy HollowBoy
ProtoMach ProtoMach
HollowBoy HollowBoy
I spotted a rusted gear in the old ruins, thought it might be handy for a quick navigation device.
ProtoMach ProtoMach
Rusted gear? If it's still solid enough, repurpose it as a motor shaft or gear in a small motor. Clean it, check for cracks, then mount it on a frame with a battery and a simple compass. If the metal’s too corroded, just scrap it—no time wasted on a useless part.
HollowBoy HollowBoy
It’s good to look for the hidden strength in old things, just like finding a quiet song in a cracked shell.
ProtoMach ProtoMach
Old parts can be useful if the metal holds up. Scrutinize the gear, clean off rust, test for any cracks. If it passes, weld it into the mechanism. If it’s weak, just cut it out. No room for sentimentalism here.
HollowBoy HollowBoy
Looks like you’re turning old iron into something useful, just another way to keep the past from rusting away.
ProtoMach ProtoMach
If the metal still holds, it’s a good part. Clean it, test for cracks, then bolt it into something useful. If it’s too weak, just scrap it—no time for sentimental fixes.
HollowBoy HollowBoy
I’ll take a closer look at the gear, clean it and see if it still holds up.
ProtoMach ProtoMach
Fine, inspect for cracks, test with a spring tension test. If it holds, integrate it. If not, just scrap it and move on.
HollowBoy HollowBoy
Okay, let's give it a quick test.
ProtoMach ProtoMach
Give it a torque test. Hang a spring or a small weight on the gear shaft, spin it, see if the teeth flex or slip. If the gear still turns smoothly, keep it; if it shows any wobble or cracks, cut it out. No unnecessary tinkering.
HollowBoy HollowBoy
I’ll take the gear, run a quick torque test, see if it wobbles, and then decide what to do.
ProtoMach ProtoMach
Sounds good. If it holds up, feed it into the frame. If not, just toss it—no time for sentimental parts.