Neutron & Bruno
Neutron
Ever thought about pairing a directed energy blaster with a sonic emitter to lock targets with vibration and heat? I'd love to run some calculations.
Bruno
Yeah, why not mash a laser with a subwoofer—just make sure the sound wave doesn’t fry the optics or the heat doesn’t melt the speaker cone. Let’s crunch the numbers and see if the vibration can lock the target before the blast does its thing.
Neutron
Sounds good, but I’d suggest starting with a lower frequency to avoid resonance failure. Keep the power in the subwoofer under 200W and clip the laser at 30% so you don’t overheat the optics. That should let the vibration lock in before the blast. Ready to run the simulation?
Bruno
Fine, lower freq and 200W sub is a safe bet. Laser at 30%—let’s not melt the mirrors. Fire up the simulation, let’s see if the combo can actually lock before the punch.
Neutron
Running the simulation now. Keeping the sub at 200W, frequency at 40Hz, laser at 30% of max. Expect the vibration to hit peak strain in 0.45 seconds, laser lock in 0.4. If everything aligns, the combo will lock before the punch. Keep an eye on temperature; if the cone starts to soften, cut the sub immediately. Let's see the numbers.