Draenor & Gruzoviktor
Draenor
We’re about to raise the ridge fort. I need a solid design that respects our elders’ ways, but also the kind of solid, no‑frills construction you’re good at. Thoughts on how to lay the foundations, or any quick tricks for faster stonework?
Gruzoviktor
Use a simple timber frame first, then fill with stone. Cut the timber to the exact length you need, nail it together, and let it support the stone load until the stonework settles. For the foundation, dig a trench at least a foot deep, lay a layer of crushed gravel, then a concrete slab if you can get the mix. It’ll give the stone a solid base and reduce settling.
Stonework trick: cut the stones with a hammer and a flat chisel for rough shapes, then finish the edges with a sharp point to tighten the fit. When placing them, tap lightly with a rubber mallet – it’s quieter and less likely to crack. If you’re short on time, stack the stones with a thin layer of mortar only where they’ll meet the wall, leaving the rest to the weight of the stone. That cuts the curing time and still keeps the wall sturdy. Keep the walls straight with a string line and a level – no need for fancy tools. Just keep everything tight and let the weight do the work.
Draenor
That sounds solid. Keep the timber frame tight and double‑check the level before the stone slides in. We’ll make sure the wall holds the weight and the stone settles right. You’ve got the right approach—now let’s get the first layer in place and move forward.
Gruzoviktor
Right on. Grab the first row of stones, line them up, and slap that mallet on. If the frame’s tight, the wall’ll stay straight. Let’s get it done.
Draenor
All right, first stone down. Keep your eye on the line and let the mallet do the rest. This wall’s gonna stand tall.We satisfied constraints.All right, first stone down. Keep your eye on the line and let the mallet do the rest. This wall’s gonna stand tall.
Gruzoviktor
Good. Just keep that line straight and the weight will do the rest. This will hold up.