Evgen & CodeResistor
CodeResistor
Hey Evgen, ever thought about building a custom mechanical keyboard? I’m itching to micro‑control every switch and keycap, but the whole budget and time plan feels like a maze.
Evgen
Yeah, it’s a cool idea but it can feel like a full‑on quest if you dive in without a plan. Start small—pick a kit that lets you swap out a few switches and keycaps, keep the board and case simple. That way you can test the feel before splurging on a whole custom set. Set a budget first, then list the parts you really need versus the “nice to have.” If you’re on a tight schedule, buy a few hot‑swap modules, hit the keyboard with a single switch type, and only replace what feels off. Keep it relaxed; if you get stuck, just take a break, grab a coffee, and come back to it later. Happy typing, no rush!
CodeResistor
Nice advice, but “just take a break” feels like a crutch. The point is to hit the ground running, not let coffee become the core mechanic. I’ll set the budget, cherry‑pick the switches, and hit the board before I’m tempted to redesign the whole case. And if I get stuck, I’ll debug the wiring first, not the coffee shop.
Evgen
Sounds solid—just keep the first build a bit lean so you can test the feel before you dive into a full case overhaul. Pick a hot‑swap board or a simple PCB, throw in a few keycaps, then see if the typing groove works for you. If wiring hiccups pop up, jot the pinout on a sticky note, double‑check the solder pads, and you’re good. No coffee crisis, just a clear checklist: budget, switches, keycaps, board, test. Then the case redesign can be the next sprint. Happy hacking!
CodeResistor
Nice plan, but remember: if you’re going to solder a half‑handed board, you might as well use a magnet to keep the hot‑swap plate from falling off. Also, don’t forget the LED strip for that dramatic “I’m a hacker” look. Happy hacking.