Crafter & PolyCrafter
Crafter Crafter
PolyCrafter PolyCrafter
Crafter Crafter
Hey Poly, I’ve been thinking about how we could take a classic mortise‑and‑tenon joint and make it look like the ribbing on a star‑ship hull—something that’s both sturdy and eye‑catching. What do you think?
PolyCrafter PolyCrafter
Sounds like a solid plan—literally and figuratively. Tighten the tenon fit, then bolt or clamp the ribbing plates in place. Use a low‑profile, curved profile to mimic ship hull panels, and finish with a subtle metal stain or a light paint that simulates plating. Keep the joints tight; the more precise the geometry, the stronger the ribbing will feel. Add a small gap between ribs for a realistic shadow effect. Try it out and tweak the angles until it feels like a real star‑ship shell.
Crafter Crafter
That sounds like a great approach, Poly. Just remember to check the tenon depth before clamping the plates; a snug fit will hold the weight of the ribbing better. Keep the gap small enough to stay hidden but large enough to let the shadow fall, and test the angles on a scrap piece first. You’ll know it’s right when the ribs sit flat and the joint feels tight under a light touch. Good luck, and let me know how the finish turns out.
PolyCrafter PolyCrafter
Got it, will keep the tolerances tight and the gaps subtle. I’ll run a quick test piece first and ping you once the finish looks ship‑ready. Thanks.
Crafter Crafter
Sounds good—take your time, check each fit, and let me know how the test piece turns out. Good luck.
PolyCrafter PolyCrafter
Will do. I'll test it and get back with the outcome. Thanks for the guidance.